The 5-axis portal milling machine FZ 25 offers the universal solution for machining highly complex and voluminous components. Model and composite materials and light metals are machined with this HSC gantry machine. This series meets industry-specific requirements from many areas, for example in automotive design, where large, voluminous models are produced, or in model and mould making, especially when very large workpieces with deep contours are processed.
It is also perfect for use in boat and shipbuilding and in the wind power industry, since the parts used there often have elongated shapes, as well as in aircraft construction, e.g. when milling panels, other large components and parts with extreme contours.
The fork head is a mono block cast version. Despite its small size, the VH10 reached high clamping forces and thus allows a stable component processing. An effective process cooling with cooling lubricants and/or minimum quantity lubrication are optionally available. In particular, the VH10 is suitable for aluminum and composite material, plastics, UREOL and clay milling.
|X-axis||276" (7,000 mm)|
|Y-axis||138" (3,500 mm)|
|Z-axis||79" (2,000 mm)|
|Length||236" (6,000 mm)|
|Width||118" (3,000 mm)|
|Height||10" (250 mm)|
|Table Load||max. 5,000 kg/m2|
|Pitch of T-Slots||10" (250 mm)|
|Feed X- and Y-axis||up to 50 m/min|
|Feed Z-axis||up to 30 m/min|
|Acceleration of Linear Axes||up to 5m/s2|
|Positioning accuracy X-axis||0.002" (0.050 mm)|
|Positioning accuracy Y-axis||0.001" (0.030 mm)|
|Positioning accuracy Z-axis||0.001" (0.030 mm)|
|Repeatability X-axis||0.002" (0.040 mm)|
|Repeatability Y-axis||0.002" (0.040 mm)|
|Repeatability Z-axis||0.001" (0.015 mm)|
Experience how close maximum mechanical accuracy comes to perfection. Our milling solutions guarantee the highest quality and precision.
Our stock and used machines are available on short notice. We will be pleased to inform you about other planned stock machines upon request.