This gantry milling machine is perfect for machining aluminum and composite materials. The machine sits on a flat foundation and can be set up on any solid industrial floor. The machine table is firmly anchored to the FZU37 so the workpiece does not have to be moved. The milling process is highly precise, regardless of weight and size of the workpiece.
The FZU37 facilitate a consistent, efficient milling process. Thanks to its combination of high stability and rigidity the machine meets all the requirements of model making, tool and mold industry, including the demands of the aerospace, automotive and alternative energy industries.
The integrated vibration and vibration damping ensures maximum surface quality and cutting performance. Due to the backlash-free drive, the 2-axis milling head achieves precise positioning and repeat accuracy. Suitable for HSC machining of aluminum, CFRP and GRP, achieves a maximum performance in volume cutting.
This design ensures outstanding temperature stability and posses- ses integrated oscillation and vibration damping for even greater milling precision. The A-axis is powered by a zero-play torque drive package, and the C-axis is powered directly by a torque motor. A liquid cooling system dissipates the heat from simultaneous machining. Both heads are suitable for milling aluminum, composites, steel and cast iron.
The A-axis drive employs dual torque motors with electronic pre-load for backlash elimination. The C-axis has a direct torque drive. The enables rapid an high precision positioning. With its symmetrical and compact design, which tapers towards the tool, the VH 20 milling head has a low interference contour and can be combined with spindles from various manufacturers.
The fork head is a mono block cast version. Despite its small size, the VH10 reached high clamping forces and thus allows a stable component processing. An effective process cooling with cooling lubricants and/or minimum quantity lubrication are optionally available. In particular, the VH10 is suitable for aluminum and composite material, plastics, UREOL and clay milling.
The M3ABC can machine different workpieces four times as fast as conventional 2-axis milling heads. This high-performance milling head is particularly suitable for complex processes, such as milling of conical pockets in structural components in the aerospace industry. With its constantly high advance rate and huge swiveling range the compact M3ABC offers almost unlimited flexibility.
|X-axis||2,500 mm / 5,000 mm / 7,500 mm|
|Y-axis||3,000 mm / 3,500 mm / 4,000 mm|
|Z-axis||1,250 / 1,500 mm|
|Length||2,500 mm / 5,000 mm / 7,500 mm|
|Width||3,000 mm / 3,500 mm / 4,000 mm|
|Table Load||8,000 kg/m2|
|max. 35 t|
|Pitch of T-Slots||250 mm|
|Drives - Linear Axes|
|Feed Rate||X-, Y-, Z-axis||up to 60 m/min|
|Acceleration||X-, Y-, Z-axis||max. 3 - 5 m/s2|
|Required Space (without peripherals) Y = 3,000 mm||Length||5,100–10,100 mm|
|Width||7,600 – 8,600 mm|
|Height||5,950 – 6,450 mm|
|Standard Accuracy||in accordance to VDI/DGQ 3441 or ISO 230-2|
|Special Accuracy||on request|
The smallest details and largest dimensions, speed and thoroughness, performance and economy - these are the areas of tension in which we operate successfully. The satisfaction of our customers always takes centre stage.
With every Zimmermann solution, we also sell our customers the good feeling of security.